Wow hey everyone today I’ll be showing you my upgraded stun baton if you’re
you my upgraded stun baton if you’re
you my upgraded stun baton if you’re interested in building this yourself
interested in building this yourself
interested in building this yourself there’s a list of parts tools and
there’s a list of parts tools and
there’s a list of parts tools and materials in the description of this
materials in the description of this
materials in the description of this video please keep in mind that this is
video please keep in mind that this is
video please keep in mind that this is for entertainment purposes only if you
for entertainment purposes only if you
for entertainment purposes only if you rely on the information portrayed in
rely on the information portrayed in
rely on the information portrayed in this video you assume the responsibility
this video you assume the responsibility
this video you assume the responsibility for the results have fun but take proper
for the results have fun but take proper
for the results have fun but take proper safety precautions and remember that
safety precautions and remember that
safety precautions and remember that every project you try is at your own
every project you try is at your own
every project you try is at your own risk
risk
risk [Music]
first I’ll show you a quick firing test
first I’ll show you a quick firing test and also go over a couple of the key
and also go over a couple of the key
and also go over a couple of the key features of this design here you can see
features of this design here you can see
features of this design here you can see that it’s currently charging and on the
that it’s currently charging and on the
that it’s currently charging and on the bottom there is your master switch then
bottom there is your master switch then
bottom there is your master switch then to activate the stun gun portion you
to activate the stun gun portion you
to activate the stun gun portion you first need to turn it on by sliding that
first need to turn it on by sliding that
first need to turn it on by sliding that little switch forward and then I
little switch forward and then I
little switch forward and then I switched it from a red LED to a blue one
switched it from a red LED to a blue one
switched it from a red LED to a blue one just because I think it looks nicer
just because I think it looks nicer
just because I think it looks nicer press this button here to activate the
press this button here to activate the
press this button here to activate the stun and there are three windows
stun and there are three windows
stun and there are three windows including I guess for if you consider
including I guess for if you consider
including I guess for if you consider the front being like a giant cattle prod
the front being like a giant cattle prod
the front being like a giant cattle prod it’s pretty intimidating but it’s not
it’s pretty intimidating but it’s not
it’s pretty intimidating but it’s not that different from the original design
that different from the original design
that different from the original design of the stun gun flashlight so first I’ll
of the stun gun flashlight so first I’ll
of the stun gun flashlight so first I’ll just show you the and it will stun on
just show you the and it will stun on
just show you the and it will stun on all three windows so that’s really nice
all three windows so that’s really nice
all three windows so that’s really nice if you’re being attacked you don’t have
if you’re being attacked you don’t have
if you’re being attacked you don’t have to necessarily use one side of it and
to necessarily use one side of it and
to necessarily use one side of it and then the front you have the cattle prod
then the front you have the cattle prod
then the front you have the cattle prod portion nice surface it’s kind of
portion nice surface it’s kind of
portion nice surface it’s kind of sparking on this
very intimidating and I’m really
very intimidating and I’m really impressed with the final result of this
impressed with the final result of this
impressed with the final result of this design here we have a side-by-side
design here we have a side-by-side
design here we have a side-by-side comparison of the original and modified
comparison of the original and modified
comparison of the original and modified version of the stun baton both are made
version of the stun baton both are made
version of the stun baton both are made out of a very strong and durable
out of a very strong and durable
out of a very strong and durable aluminum alloy and it has the same
aluminum alloy and it has the same
aluminum alloy and it has the same circuitry so they advertise it’s going
circuitry so they advertise it’s going
circuitry so they advertise it’s going to be outputting 9 million volts which
to be outputting 9 million volts which
to be outputting 9 million volts which is pretty hard to believe that they
is pretty hard to believe that they
is pretty hard to believe that they would sell something that powerful
would sell something that powerful
would sell something that powerful commercially available it’s definitely
commercially available it’s definitely
commercially available it’s definitely not impossible I did shock myself with
not impossible I did shock myself with
not impossible I did shock myself with this thing by mistake and it hurts like
this thing by mistake and it hurts like
this thing by mistake and it hurts like hell so I guess I could say that 9
hell so I guess I could say that 9
hell so I guess I could say that 9 million volts would be accurate but I
million volts would be accurate but I
million volts would be accurate but I have no way to tell even if I did attach
have no way to tell even if I did attach
have no way to tell even if I did attach this to a voltmeter I think it would
this to a voltmeter I think it would
this to a voltmeter I think it would explode
explode
explode so I’ll just take their word for it and
so I’ll just take their word for it and
so I’ll just take their word for it and take mine this thing definitely can get
take mine this thing definitely can get
take mine this thing definitely can get the job done it’s got a freaking meat
the job done it’s got a freaking meat
the job done it’s got a freaking meat tenderizer on the front it’s actually
tenderizer on the front it’s actually
tenderizer on the front it’s actually not spikes it’s kind of like a flat
not spikes it’s kind of like a flat
not spikes it’s kind of like a flat spike in itself but I think it adds a
spike in itself but I think it adds a
spike in itself but I think it adds a little bit more weight it’s definitely
little bit more weight it’s definitely
little bit more weight it’s definitely much more intimidating looking and at
much more intimidating looking and at
much more intimidating looking and at the front you have this triple stun
the front you have this triple stun
the front you have this triple stun probe and the flashlight this has a
probe and the flashlight this has a
probe and the flashlight this has a little computer built into it so you
little computer built into it so you
little computer built into it so you slide this up and down and it will sort
slide this up and down and it will sort
slide this up and down and it will sort of go through the cycle low intensity
of go through the cycle low intensity
of go through the cycle low intensity flashlight then your strobe and your
flashlight then your strobe and your
flashlight then your strobe and your high-intensity flashlight so it’s pretty
high-intensity flashlight so it’s pretty
high-intensity flashlight so it’s pretty cool definitely useful and if you’re
cool definitely useful and if you’re
cool definitely useful and if you’re wondering about the overall length this
wondering about the overall length this
wondering about the overall length this original is 19 inches and with the
original is 19 inches and with the
original is 19 inches and with the modification comes to 23 inches so
modification comes to 23 inches so
modification comes to 23 inches so definitely having the modifications you
definitely having the modifications you
definitely having the modifications you have more striking area you have a
have more striking area you have a
have more striking area you have a little bit extra reach I mean these
little bit extra reach I mean these
little bit extra reach I mean these things are just overkill and I just went
things are just overkill and I just went
things are just overkill and I just went into like ridiculous danger mode with
into like ridiculous danger mode with
into like ridiculous danger mode with this one but I’m okay with that
this one but I’m okay with that
this one but I’m okay with that so here I’m going to show you how to
so here I’m going to show you how to
so here I’m going to show you how to modify your existing stun baton first
modify your existing stun baton first
modify your existing stun baton first you’re going to need to get a an x-acto
you’re going to need to get a an x-acto
you’re going to need to get a an x-acto knife and a small screwdriver because
knife and a small screwdriver because
knife and a small screwdriver because the top here there is some tape and
the top here there is some tape and
the top here there is some tape and you’re going to want to remove that now
you’re going to want to remove that now
you’re going to want to remove that now I’ve already done so and you can see
I’ve already done so and you can see
I’ve already done so and you can see where it was based off of the leftover
where it was based off of the leftover
where it was based off of the leftover adhesive that was used to cover that up
adhesive that was used to cover that up
adhesive that was used to cover that up it’s kind of like a black electrical
it’s kind of like a black electrical
it’s kind of like a black electrical tape with some writing on it it says
tape with some writing on it it says
tape with some writing on it it says like how much voltage there is but
like how much voltage there is but
like how much voltage there is but really I need that and if you want to go
really I need that and if you want to go
really I need that and if you want to go back and cover that up you could always
back and cover that up you could always
back and cover that up you could always just use electrical tape or what I like
just use electrical tape or what I like
just use electrical tape or what I like to do is buy this carbon fiber vinyl and
to do is buy this carbon fiber vinyl and
to do is buy this carbon fiber vinyl and it makes it look really really
it makes it look really really
it makes it look really really sophisticated and upgraded even though
sophisticated and upgraded even though
sophisticated and upgraded even though it’s just some cheap plastic material
it’s just some cheap plastic material
it’s just some cheap plastic material but I’m not going to pay for carbon
but I’m not going to pay for carbon
but I’m not going to pay for carbon fiber for a prototype it just doesn’t
fiber for a prototype it just doesn’t
fiber for a prototype it just doesn’t make sense so let’s go ahead and do that
make sense so let’s go ahead and do that
make sense so let’s go ahead and do that and I’ll show you the internals now you
and I’ll show you the internals now you
and I’ll show you the internals now you can see that this screw is very very
can see that this screw is very very
can see that this screw is very very small so what I like to do is buy these
small so what I like to do is buy these
small so what I like to do is buy these small bags just to carry them in and
small bags just to carry them in and
small bags just to carry them in and store them just so I don’t lose them I’m
store them just so I don’t lose them I’m
store them just so I don’t lose them I’m sure you have a better method but this
sure you have a better method but this
sure you have a better method but this is what’s works for me and the nice
is what’s works for me and the nice
is what’s works for me and the nice thing is that I can just label this bag
thing is that I can just label this bag
thing is that I can just label this bag and it says what project it’s from and
and it says what project it’s from and
and it says what project it’s from and how many parts there were so that I can
how many parts there were so that I can
how many parts there were so that I can keep track of it very easily now you can
keep track of it very easily now you can
keep track of it very easily now you can see it’s very simple just this comes
see it’s very simple just this comes
see it’s very simple just this comes right out and the red wires are your
right out and the red wires are your
right out and the red wires are your stun gun leads I go up to the top of the
stun gun leads I go up to the top of the
stun gun leads I go up to the top of the flashlight and then you have this little
flashlight and then you have this little
flashlight and then you have this little plastic cup and very easily this is your
plastic cup and very easily this is your
plastic cup and very easily this is your lamp now the lamp can just be saved for
lamp now the lamp can just be saved for
lamp now the lamp can just be saved for another project if you’d like but you’re
another project if you’d like but you’re
another project if you’d like but you’re not going to use it if you’re upgrading
not going to use it if you’re upgrading
not going to use it if you’re upgrading your stun gun there probably was a way
your stun gun there probably was a way
your stun gun there probably was a way for me to add that portion at the top
for me to add that portion at the top
for me to add that portion at the top here there’s enough room but I didn’t
here there’s enough room but I didn’t
here there’s enough room but I didn’t really want to weaken the structure of
really want to weaken the structure of
really want to weaken the structure of this I mean I could have sat right on
this I mean I could have sat right on
this I mean I could have sat right on top of there and maybe I’ll come back in
top of there and maybe I’ll come back in
top of there and maybe I’ll come back in another project and do that but I really
another project and do that but I really
another project and do that but I really didn’t care to have a flashlight in this
didn’t care to have a flashlight in this
didn’t care to have a flashlight in this modification because I was going for
modification because I was going for
modification because I was going for more of a superhero look now you have
more of a superhero look now you have
more of a superhero look now you have your two leads and we’re going to go on
your two leads and we’re going to go on
your two leads and we’re going to go on to the next step where I show you how to
to the next step where I show you how to
to the next step where I show you how to prepare the 3d printed portion there’s
prepare the 3d printed portion there’s
prepare the 3d printed portion there’s different websites where you can
different websites where you can
different websites where you can actually buy the piece already 3d
actually buy the piece already 3d
actually buy the piece already 3d printed they’ll ship it to you but
printed they’ll ship it to you but
printed they’ll ship it to you but definitely buy a 3d printer I don’t know
definitely buy a 3d printer I don’t know
definitely buy a 3d printer I don’t know what you’re waiting for if that’s
what you’re waiting for if that’s
what you’re waiting for if that’s holding you back then all of my projects
holding you back then all of my projects
holding you back then all of my projects from here out are probably going to be
from here out are probably going to be
from here out are probably going to be out of your reach if it’s the tool of
out of your reach if it’s the tool of
out of your reach if it’s the tool of the future you can build anything
the future you can build anything
the future you can build anything I highly recommend it I’ll leave a link
I highly recommend it I’ll leave a link
I highly recommend it I’ll leave a link in the description for all these parts
in the description for all these parts
in the description for all these parts and also recommendation for a 3d printer
and also recommendation for a 3d printer
and also recommendation for a 3d printer that I think would be good starting off
that I think would be good starting off
that I think would be good starting off now I’ll show you how to modify your 3d
now I’ll show you how to modify your 3d
now I’ll show you how to modify your 3d printed portion you’re going to need
printed portion you’re going to need
printed portion you’re going to need some threaded rod and also wire this is
some threaded rod and also wire this is
some threaded rod and also wire this is about what you’re looking for and also
about what you’re looking for and also
about what you’re looking for and also some wire strippers and some pliers now
some wire strippers and some pliers now
some wire strippers and some pliers now this is pretty simple you have this
this is pretty simple you have this
this is pretty simple you have this piece of 5/16 inch threaded rod thread
piece of 5/16 inch threaded rod thread
piece of 5/16 inch threaded rod thread it down to right about here then take
it down to right about here then take
it down to right about here then take your wire and strip both ends and on the
your wire and strip both ends and on the
your wire and strip both ends and on the other end you want to leave about half
other end you want to leave about half
other end you want to leave about half an inch then you’re going to make sure
an inch then you’re going to make sure
an inch then you’re going to make sure that you twist this because it’s going
that you twist this because it’s going
that you twist this because it’s going to be sort of like threading a needle
to be sort of like threading a needle
to be sort of like threading a needle the bottom here so find the hole that
the bottom here so find the hole that
the bottom here so find the hole that matches up and you have that go through
matches up and you have that go through
matches up and you have that go through then if you want to use you can probably
then if you want to use you can probably
then if you want to use you can probably use your finger just to bend this now
use your finger just to bend this now
use your finger just to bend this now see here how this is going to work
see here how this is going to work
see here how this is going to work you’re going to slide this down okay and
you’re going to slide this down okay and
you’re going to slide this down okay and it’s going to get a little bit of
it’s going to get a little bit of
it’s going to get a little bit of tension because right at the bend of the
tension because right at the bend of the
tension because right at the bend of the wire that’s when you take rod and you
wire that’s when you take rod and you
wire that’s when you take rod and you twist this down now it’s going to get a
twist this down now it’s going to get a
twist this down now it’s going to get a little bit challenging at some points do
little bit challenging at some points do
little bit challenging at some points do with your fingers so I have the pliers
with your fingers so I have the pliers
with your fingers so I have the pliers here and you pretty much understand how
here and you pretty much understand how
here and you pretty much understand how this is going to work now this is going
this is going to work now this is going
this is going to work now this is going to act as a locking mechanism to sort of
to act as a locking mechanism to sort of
to act as a locking mechanism to sort of pinch the wire in between and you don’t
pinch the wire in between and you don’t
pinch the wire in between and you don’t have to use any solder or glue or
have to use any solder or glue or
have to use any solder or glue or anything it’s just going to be kind of a
anything it’s just going to be kind of a
anything it’s just going to be kind of a mechanical just friction fit but I think
mechanical just friction fit but I think
mechanical just friction fit but I think it works really well and if you ever
it works really well and if you ever
it works really well and if you ever need to go back and change something you
need to go back and change something you
need to go back and change something you don’t have any problems and there we go
don’t have any problems and there we go
don’t have any problems and there we go and you can see this is not coming out
and you can see this is not coming out
and you can see this is not coming out now complete the last step six times
now complete the last step six times
now complete the last step six times until you have something like this the
until you have something like this the
until you have something like this the arc is going to want to travel wherever
arc is going to want to travel wherever
arc is going to want to travel wherever it can
it can
it can whichever distance is shortest so you’re
whichever distance is shortest so you’re
whichever distance is shortest so you’re gonna have to insulate this really well
gonna have to insulate this really well
gonna have to insulate this really well and be very diligent with that that’s
and be very diligent with that that’s
and be very diligent with that that’s why I have heat shrink tubing liquid
why I have heat shrink tubing liquid
why I have heat shrink tubing liquid electrical tape and right
electrical tape and right
electrical tape and right electrical tape and whatever way you can
electrical tape and whatever way you can
electrical tape and whatever way you can do it is the right way honestly so I
do it is the right way honestly so I
do it is the right way honestly so I start off by putting heat shrink tubing
start off by putting heat shrink tubing
start off by putting heat shrink tubing and all these the black portion that I
and all these the black portion that I
and all these the black portion that I have marked off is just where I would
have marked off is just where I would
have marked off is just where I would have already removed the insulation wire
have already removed the insulation wire
have already removed the insulation wire but that needs to be exposed because
but that needs to be exposed because
but that needs to be exposed because you’re gonna have to solder this to the
you’re gonna have to solder this to the
you’re gonna have to solder this to the actual module that pumps out the charge
actual module that pumps out the charge
actual module that pumps out the charge you can just separate these to treat it
you can just separate these to treat it
you can just separate these to treat it like the prongs of something like this
like the prongs of something like this
like the prongs of something like this the charging unit you do not want these
the charging unit you do not want these
the charging unit you do not want these to touch otherwise it’s going to
to touch otherwise it’s going to
to touch otherwise it’s going to short-circuit and it’s not going to work
short-circuit and it’s not going to work
short-circuit and it’s not going to work very well and if it was an actual
very well and if it was an actual
very well and if it was an actual electrical socket it might blow a fuse
electrical socket it might blow a fuse
electrical socket it might blow a fuse so you can tell why that needs to happen
so you can tell why that needs to happen
so you can tell why that needs to happen I would definitely recommend this it
I would definitely recommend this it
I would definitely recommend this it makes your life a lot easier at the
makes your life a lot easier at the
makes your life a lot easier at the bottom of this module there’s a little
bottom of this module there’s a little
bottom of this module there’s a little bit of this plastic I would use an
bit of this plastic I would use an
bit of this plastic I would use an exacto knife and very very carefully
exacto knife and very very carefully
exacto knife and very very carefully trim around that because you want as
trim around that because you want as
trim around that because you want as much space as possible once you put
much space as possible once you put
much space as possible once you put everything in here
everything in here
everything in here there is almost no room for error that
there is almost no room for error that
there is almost no room for error that doesn’t mean that it’s super complicated
doesn’t mean that it’s super complicated
doesn’t mean that it’s super complicated you just have to take your time I would
you just have to take your time I would
you just have to take your time I would say that removing that helps because
say that removing that helps because
say that removing that helps because there’s another portion right here but
there’s another portion right here but
there’s another portion right here but this is pushed up against and if you
this is pushed up against and if you
this is pushed up against and if you remove this that gives you a little bit
remove this that gives you a little bit
remove this that gives you a little bit more breathing room and allows you to
more breathing room and allows you to
more breathing room and allows you to put the parts in much easier so remove
put the parts in much easier so remove
put the parts in much easier so remove that portion of plastic and then it’s
that portion of plastic and then it’s
that portion of plastic and then it’s pretty self-explanatory at this point
pretty self-explanatory at this point
pretty self-explanatory at this point you want to solder these two together so
you want to solder these two together so
you want to solder these two together so that you have the arcing of the
that you have the arcing of the
that you have the arcing of the electricity from the stun-gun portion
electricity from the stun-gun portion
electricity from the stun-gun portion going into these I guess you could call
going into these I guess you could call
going into these I guess you could call them probes once you have this correctly
them probes once you have this correctly
them probes once you have this correctly wired up give it a quick test and see
wired up give it a quick test and see
wired up give it a quick test and see that the arcing is going across that’s
that the arcing is going across that’s
that the arcing is going across that’s pretty good now there is a possibility
pretty good now there is a possibility
pretty good now there is a possibility that it’s going to arc inside which is
that it’s going to arc inside which is
that it’s going to arc inside which is why I said you have to be very diligent
why I said you have to be very diligent
why I said you have to be very diligent whenever you’re grounding each wire so
whenever you’re grounding each wire so
whenever you’re grounding each wire so that it can’t just arc across you want
that it can’t just arc across you want
that it can’t just arc across you want something that’s obstructing it like an
something that’s obstructing it like an
something that’s obstructing it like an insulator you’ll notice that I put this
insulator you’ll notice that I put this
insulator you’ll notice that I put this hole here I actually retracted that in
hole here I actually retracted that in
hole here I actually retracted that in the final design because I felt that
the final design because I felt that
the final design because I felt that putting my soldering iron you just use
putting my soldering iron you just use
putting my soldering iron you just use the tip of the soldering iron to melt a
the tip of the soldering iron to melt a
the tip of the soldering iron to melt a hole really quickly and then you would
hole really quickly and then you would
hole really quickly and then you would install your super tiny easy to lose and
install your super tiny easy to lose and
install your super tiny easy to lose and frustrating screw and that’s going to
frustrating screw and that’s going to
frustrating screw and that’s going to anchor it in place
anchor it in place
anchor it in place now I’ll show you how to disassemble the
now I’ll show you how to disassemble the
now I’ll show you how to disassemble the handle so that you can expose the
handle so that you can expose the
handle so that you can expose the electronics and change that led to
electronics and change that led to
electronics and change that led to whatever color you like you’re going to
whatever color you like you’re going to
whatever color you like you’re going to need a soldering iron as well as this
need a soldering iron as well as this
need a soldering iron as well as this tool which is used for removing the
tool which is used for removing the
tool which is used for removing the retaining ring the first thing you’re
retaining ring the first thing you’re
retaining ring the first thing you’re going to want to do is unscrew the
going to want to do is unscrew the
going to want to do is unscrew the handle then you’re going to have this
handle then you’re going to have this
handle then you’re going to have this retaining ring that’s going to be
retaining ring that’s going to be
retaining ring that’s going to be inserted right in this little groove
inserted right in this little groove
inserted right in this little groove right here it’s kind of hard to see but
right here it’s kind of hard to see but
right here it’s kind of hard to see but right here is where the retaining ring
right here is where the retaining ring
right here is where the retaining ring is going to be and that’s going to be
is going to be and that’s going to be
is going to be and that’s going to be holding this piece of plastic in as well
holding this piece of plastic in as well
holding this piece of plastic in as well as the housing for all the electronics
as the housing for all the electronics
as the housing for all the electronics now this can be disassembled just with a
now this can be disassembled just with a
now this can be disassembled just with a small Phillips head screwdriver and then
small Phillips head screwdriver and then
small Phillips head screwdriver and then that’s where all of the electronics is
that’s where all of the electronics is
that’s where all of the electronics is obviously in the switch up close you can
obviously in the switch up close you can
obviously in the switch up close you can see the red LED right there now it’s
see the red LED right there now it’s
see the red LED right there now it’s connected to a resistor and then also to
connected to a resistor and then also to
connected to a resistor and then also to the switch right here and then that wire
the switch right here and then that wire
the switch right here and then that wire goes back to this switch so as long as
goes back to this switch so as long as
goes back to this switch so as long as everything is maintained it doesn’t
everything is maintained it doesn’t
everything is maintained it doesn’t matter if you remove that so I would
matter if you remove that so I would
matter if you remove that so I would start by D soldering right here and then
start by D soldering right here and then
start by D soldering right here and then you can just this is actually just kind
you can just this is actually just kind
you can just this is actually just kind of free-floating in there and it’s
of free-floating in there and it’s
of free-floating in there and it’s anchored by this so once this is removed
anchored by this so once this is removed
anchored by this so once this is removed you can get a little bit easier access
you can get a little bit easier access
you can get a little bit easier access and pull the LED out which you can see
and pull the LED out which you can see
and pull the LED out which you can see it’s already kind of just friction fit
it’s already kind of just friction fit
it’s already kind of just friction fit into this hole right here then you just
into this hole right here then you just
into this hole right here then you just change them out and keep in mind the
change them out and keep in mind the
change them out and keep in mind the polarity of the LED I would definitely
polarity of the LED I would definitely
polarity of the LED I would definitely take a picture of the electronics before
take a picture of the electronics before
take a picture of the electronics before you start messing around because if
you start messing around because if
you start messing around because if something comes undone you’re going to
something comes undone you’re going to
something comes undone you’re going to have a really tough time knowing where
have a really tough time knowing where
have a really tough time knowing where everything was originally connected
everything was originally connected
everything was originally connected that’s just a tip that I’ve had over the
that’s just a tip that I’ve had over the
that’s just a tip that I’ve had over the years so that you don’t make any
years so that you don’t make any
years so that you don’t make any mistakes now if you want to touch up
mistakes now if you want to touch up
mistakes now if you want to touch up your stun baton at this point feel free
your stun baton at this point feel free
your stun baton at this point feel free to do so I’m using this carbon fiber
to do so I’m using this carbon fiber
to do so I’m using this carbon fiber vinyl obviously I can’t afford custom
vinyl obviously I can’t afford custom
vinyl obviously I can’t afford custom carbon fiber parts so I’m just going to
carbon fiber parts so I’m just going to
carbon fiber parts so I’m just going to fake it till I make it and use some
fake it till I make it and use some
fake it till I make it and use some black electrical tape to cover up the
black electrical tape to cover up the
black electrical tape to cover up the logo because that looked really dumb and
logo because that looked really dumb and
logo because that looked really dumb and also added to the hand
also added to the hand
also added to the hand able to insulate it and then went back
able to insulate it and then went back
able to insulate it and then went back on all the surfaces where the screws
on all the surfaces where the screws
on all the surfaces where the screws were and I would definitely recommend
were and I would definitely recommend
were and I would definitely recommend like a large ruler with like a tee at
like a large ruler with like a tee at
like a large ruler with like a tee at the end so that you can make everything
the end so that you can make everything
the end so that you can make everything nice and squared off
nice and squared off
nice and squared off and it’s really simple to do so I cut a
and it’s really simple to do so I cut a
and it’s really simple to do so I cut a mat would also help and it looks pretty
mat would also help and it looks pretty
mat would also help and it looks pretty cool in my opinion
cool in my opinion
cool in my opinion even that little design kind of adds a
even that little design kind of adds a
even that little design kind of adds a little bit of artistic flair and there’s
little bit of artistic flair and there’s
little bit of artistic flair and there’s the handle I think I did a pretty nice
the handle I think I did a pretty nice
the handle I think I did a pretty nice job what do you guys think I’m
job what do you guys think I’m
job what do you guys think I’m definitely upgrading the aesthetics of
definitely upgrading the aesthetics of
definitely upgrading the aesthetics of this type of stuff but I still think
this type of stuff but I still think
this type of stuff but I still think that there’s a little bit of
that there’s a little bit of
that there’s a little bit of improvements that can be made I would
improvements that can be made I would
improvements that can be made I would like to maybe go back and add the
like to maybe go back and add the
like to maybe go back and add the flashlight I don’t really know is that
flashlight I don’t really know is that
flashlight I don’t really know is that necessary it’s cool but I think if I was
necessary it’s cool but I think if I was
necessary it’s cool but I think if I was going to be a superhero I’d probably
going to be a superhero I’d probably
going to be a superhero I’d probably have like LEDs built into my mask or
have like LEDs built into my mask or
have like LEDs built into my mask or like a headlamp type of thing I don’t
like a headlamp type of thing I don’t
like a headlamp type of thing I don’t know if having a flashlight is really
know if having a flashlight is really
know if having a flashlight is really beneficial but to the average person I
beneficial but to the average person I
beneficial but to the average person I would say yeah it’s nice to be able to
would say yeah it’s nice to be able to
would say yeah it’s nice to be able to see in the dark I just honestly think
see in the dark I just honestly think
see in the dark I just honestly think that this is kind of overkill for a
that this is kind of overkill for a
that this is kind of overkill for a self-defense gadget but I thought I’d
self-defense gadget but I thought I’d
self-defense gadget but I thought I’d share it with you because you seem to
share it with you because you seem to
share it with you because you seem to like this type of stuff and I like
like this type of stuff and I like
like this type of stuff and I like building it so it’s a win-win situation
building it so it’s a win-win situation
building it so it’s a win-win situation for the both of us please leave a
for the both of us please leave a
for the both of us please leave a comment and share this video with your
comment and share this video with your
comment and share this video with your friends if you think that they would
friends if you think that they would
friends if you think that they would like it I think that this is something
like it I think that this is something
like it I think that this is something unique and if you help me spread the
unique and if you help me spread the
unique and if you help me spread the word of my channel that’s going to help
word of my channel that’s going to help
word of my channel that’s going to help a lot in the long run also check out my
a lot in the long run also check out my
a lot in the long run also check out my Instagram Twitter and Facebook go ahead
Instagram Twitter and Facebook go ahead
Instagram Twitter and Facebook go ahead and like and follow those that helps me
and like and follow those that helps me
and like and follow those that helps me a lot because it shows that I have
a lot because it shows that I have
a lot because it shows that I have people who care and are willing to sort
people who care and are willing to sort
people who care and are willing to sort of invest their time into what I’m doing
of invest their time into what I’m doing
of invest their time into what I’m doing and that really makes me feel good to
and that really makes me feel good to
and that really makes me feel good to know that people are responding to the
know that people are responding to the
know that people are responding to the type of stuff that I’m doing think of
type of stuff that I’m doing think of
type of stuff that I’m doing think of this as my apocalypse riot gear got a
this as my apocalypse riot gear got a
this as my apocalypse riot gear got a really awesome
really awesome
really awesome and also stun baton this can be closed
and also stun baton this can be closed
and also stun baton this can be closed and then right here the striking surface
and then right here the striking surface
and then right here the striking surface I may upgrade this how to stun portion
I may upgrade this how to stun portion
I may upgrade this how to stun portion itself kind of a like a hammer strike
itself kind of a like a hammer strike
itself kind of a like a hammer strike it’s very natural want to hit something
it’s very natural want to hit something
it’s very natural want to hit something like that and to push them away and if
like that and to push them away and if
like that and to push them away and if they really don’t want to leave you
they really don’t want to leave you
they really don’t want to leave you alone
alone
alone press button go into battle mode
I decided to name myself Gere g3a are
I decided to name myself Gere g3a are just because Greek gadget guru is a
just because Greek gadget guru is a
just because Greek gadget guru is a mouthful and gear pretty much describes
mouthful and gear pretty much describes
mouthful and gear pretty much describes what I’m doing I’m creating badass to
what I’m doing I’m creating badass to
what I’m doing I’m creating badass to gear and it still has g3 Greek edge grew
gear and it still has g3 Greek edge grew
gear and it still has g3 Greek edge grew in it so I think it’s perfect
in it so I think it’s perfect
in it so I think it’s perfect actually had my audience and followers
actually had my audience and followers
actually had my audience and followers on Instagram helped me decide so if
on Instagram helped me decide so if
on Instagram helped me decide so if you’re not following me on Instagram
you’re not following me on Instagram
you’re not following me on Instagram you’re definitely missing out because
you’re definitely missing out because
you’re definitely missing out because I’ll ask you guys different questions on
I’ll ask you guys different questions on
I’ll ask you guys different questions on what you think I should do in moving my
what you think I should do in moving my
what you think I should do in moving my content forward also on Twitter I post
content forward also on Twitter I post
content forward also on Twitter I post different ideas that I have things that
different ideas that I have things that
different ideas that I have things that just come to mind randomly and I get
just come to mind randomly and I get
just come to mind randomly and I get your feedback on that it’s just fun to
your feedback on that it’s just fun to
your feedback on that it’s just fun to talk like I’m a normal person who would
talk like I’m a normal person who would
talk like I’m a normal person who would have thought that so that’s the fighter
have thought that so that’s the fighter
have thought that so that’s the fighter on here
there’s a fighter that’s spider spider
there’s a fighter that’s spider spider bad
bad
bad what’s pretty much it I hope you guys
what’s pretty much it I hope you guys
what’s pretty much it I hope you guys enjoyed this video definitely checking
enjoyed this video definitely checking
enjoyed this video definitely checking out our Instagram Twitter and Facebook
out our Instagram Twitter and Facebook
out our Instagram Twitter and Facebook there’s a lot of extra content that you
there’s a lot of extra content that you
there’s a lot of extra content that you guys are missing out on and the more
guys are missing out on and the more
guys are missing out on and the more following I have more marketable I
following I have more marketable I
following I have more marketable I become the sponsors so that’s going to
become the sponsors so that’s going to
become the sponsors so that’s going to help me build bigger and better projects
help me build bigger and better projects
help me build bigger and better projects so as always take it easy
so as always take it easy
so as always take it easy and thanks for watching
and thanks for watching
and thanks for watching [Music]
you
you [Music]
”
Be First to Comment