a lot of you have been asking me about the installation of this LED display in
the installation of this LED display in
the installation of this LED display in my mask it’s actually really easy and
my mask it’s actually really easy and
my mask it’s actually really easy and today I’ll be showing you how it’s done
this project will require the camión
this project will require the camión glasses now this is probably the best
glasses now this is probably the best
glasses now this is probably the best option on the market right now because
option on the market right now because
option on the market right now because everything’s self-contained and you
everything’s self-contained and you
everything’s self-contained and you don’t really even need to buy the
don’t really even need to buy the
don’t really even need to buy the battery compartments if you want to
battery compartments if you want to
battery compartments if you want to install this into a paintball mask or
install this into a paintball mask or
install this into a paintball mask or some sort of other costume the other
some sort of other costume the other
some sort of other costume the other thing is that it’s Bluetooth compatible
thing is that it’s Bluetooth compatible
thing is that it’s Bluetooth compatible with the app and so you need a
with the app and so you need a
with the app and so you need a smartphone or Android it also works with
smartphone or Android it also works with
smartphone or Android it also works with Apple and you go ahead and download the
Apple and you go ahead and download the
Apple and you go ahead and download the app camión and you can see that there’s
app camión and you can see that there’s
app camión and you can see that there’s a little link button up here so we’re
a little link button up here so we’re
a little link button up here so we’re gonna go ahead and make sure that this
gonna go ahead and make sure that this
gonna go ahead and make sure that this thing works before we disassemble it and
thing works before we disassemble it and
thing works before we disassemble it and you can see that it’s displaying this
you can see that it’s displaying this
you can see that it’s displaying this specific four-digit code d1 7e so we’re
specific four-digit code d1 7e so we’re
specific four-digit code d1 7e so we’re gonna go ahead and you can see that it’s
gonna go ahead and you can see that it’s
gonna go ahead and you can see that it’s already found it
already found it
already found it will go ahead and link that and now the
will go ahead and link that and now the
will go ahead and link that and now the phone is paired with the glasses that’s
phone is paired with the glasses that’s
phone is paired with the glasses that’s a really cool feature because it allows
a really cool feature because it allows
a really cool feature because it allows you to keep your glasses safe from
you to keep your glasses safe from
you to keep your glasses safe from anyone else who wants to tamper with it
anyone else who wants to tamper with it
anyone else who wants to tamper with it it has to be in this search mode so I
it has to be in this search mode so I
it has to be in this search mode so I guess if someone was waiting around they
guess if someone was waiting around they
guess if someone was waiting around they could connect to it but it’s not gonna
could connect to it but it’s not gonna
could connect to it but it’s not gonna allow anyone to connect unless it’s in
allow anyone to connect unless it’s in
allow anyone to connect unless it’s in this mode when you first turn it on so
this mode when you first turn it on so
this mode when you first turn it on so you can see another cool effect is this
you can see another cool effect is this
you can see another cool effect is this equalizer so as I’m talking you’ll
equalizer so as I’m talking you’ll
equalizer so as I’m talking you’ll actually display the voice fluctuation I
actually display the voice fluctuation I
actually display the voice fluctuation I thought that was a really neat effect
thought that was a really neat effect
thought that was a really neat effect and if you want to go and create your
and if you want to go and create your
and if you want to go and create your own different display you can go into
own different display you can go into
own different display you can go into the creator and so you’re seeing how
the creator and so you’re seeing how
the creator and so you’re seeing how it’s copying what I have on the screen
it’s copying what I have on the screen
it’s copying what I have on the screen so we’re going to go back here and we
so we’re going to go back here and we
so we’re going to go back here and we don’t want to save that because that’s
don’t want to save that because that’s
don’t want to save that because that’s just junk and then there’s also the
just junk and then there’s also the
just junk and then there’s also the ability to go and there’s like a little
ability to go and there’s like a little
ability to go and there’s like a little network that you can connect via
network that you can connect via
network that you can connect via Facebook and it will link you with a
Facebook and it will link you with a
Facebook and it will link you with a bunch of other creators who have
bunch of other creators who have
bunch of other creators who have different things for you to check out so
different things for you to check out so
different things for you to check out so another thing is the thermal lens this
another thing is the thermal lens this
another thing is the thermal lens this is what I’m going to be installing the
is what I’m going to be installing the
is what I’m going to be installing the electronics into
electronics into
electronics into best thing about this is that it’s two
best thing about this is that it’s two
best thing about this is that it’s two layers so you actually would be sliding
layers so you actually would be sliding
layers so you actually would be sliding the board in between the two layers and
the board in between the two layers and
the board in between the two layers and then you want to rewire everything back
then you want to rewire everything back
then you want to rewire everything back into the mask so that’s a nice compact
into the mask so that’s a nice compact
into the mask so that’s a nice compact package so another thing that I’ll show
package so another thing that I’ll show
package so another thing that I’ll show you is how I reuse the battery
you is how I reuse the battery
you is how I reuse the battery compartments from the original chemi on
compartments from the original chemi on
compartments from the original chemi on glasses and just install them into the
glasses and just install them into the
glasses and just install them into the mask it’s really easy you might be able
mask it’s really easy you might be able
mask it’s really easy you might be able to do it depending on the mask that
to do it depending on the mask that
to do it depending on the mask that you’re using I’ll take you step-by-step
you’re using I’ll take you step-by-step
you’re using I’ll take you step-by-step how I did this I think this display is
how I did this I think this display is
how I did this I think this display is really awesome it definitely adds a
really awesome it definitely adds a
really awesome it definitely adds a unique character and vibe to the mask
unique character and vibe to the mask
unique character and vibe to the mask and I plan on improving it at the same
and I plan on improving it at the same
and I plan on improving it at the same time my friend is actually working on
time my friend is actually working on
time my friend is actually working on his own helmet by adding all sorts of
his own helmet by adding all sorts of
his own helmet by adding all sorts of badass upgrades he’s even planning on
badass upgrades he’s even planning on
badass upgrades he’s even planning on laminating it with Kevlar to make it
laminating it with Kevlar to make it
laminating it with Kevlar to make it bulletproof so go check out the
bulletproof so go check out the
bulletproof so go check out the superhero armory and subscribe so you
superhero armory and subscribe so you
superhero armory and subscribe so you can stay up to date with all his latest
can stay up to date with all his latest
can stay up to date with all his latest creations I’m captain intrigue in this
creations I’m captain intrigue in this
creations I’m captain intrigue in this episode I’ll be building a superhero
episode I’ll be building a superhero
episode I’ll be building a superhero helmet with night vision super hearing
helmet with night vision super hearing
helmet with night vision super hearing and voice changing capabilities so
and voice changing capabilities so
and voice changing capabilities so here’s a sneak peek at the helmet these
here’s a sneak peek at the helmet these
here’s a sneak peek at the helmet these are the night vision goggles that I
are the night vision goggles that I
are the night vision goggles that I built in a previous episode this is the
built in a previous episode this is the
built in a previous episode this is the microphone for the voice changer and
microphone for the voice changer and
microphone for the voice changer and these are my homemade super hearing
these are my homemade super hearing
these are my homemade super hearing headphones which will be on both sides
so now I’ll show you step by step how to
so now I’ll show you step by step how to remove the electronics portion from the
remove the electronics portion from the
remove the electronics portion from the glasses it’s really not difficult you
glasses it’s really not difficult you
glasses it’s really not difficult you just have to make sure you’re patient
just have to make sure you’re patient
just have to make sure you’re patient and you don’t want to accidentally strip
and you don’t want to accidentally strip
and you don’t want to accidentally strip the screws because then you’re kind of
the screws because then you’re kind of
the screws because then you’re kind of literally screwed at that point there is
literally screwed at that point there is
literally screwed at that point there is one right here kind of goes in at an
one right here kind of goes in at an
one right here kind of goes in at an angle and there’s another one here on
angle and there’s another one here on
angle and there’s another one here on the side you might want to hold on to
the side you might want to hold on to
the side you might want to hold on to these if you decide you want to
these if you decide you want to
these if you decide you want to reassemble this but for me not too
reassemble this but for me not too
reassemble this but for me not too worried about it then you’re gonna have
worried about it then you’re gonna have
worried about it then you’re gonna have these two little clips here that’s kind
these two little clips here that’s kind
these two little clips here that’s kind of just holding this thing in place now
of just holding this thing in place now
of just holding this thing in place now you might need a small screwdriver just
you might need a small screwdriver just
you might need a small screwdriver just sort of pry that apart you might
sort of pry that apart you might
sort of pry that apart you might actually damage the plastic but I don’t
actually damage the plastic but I don’t
actually damage the plastic but I don’t plan on reassembling this thing so this
plan on reassembling this thing so this
plan on reassembling this thing so this is kind of like your point of no return
is kind of like your point of no return
is kind of like your point of no return so you can see those really thin cables
so you can see those really thin cables
so you can see those really thin cables in there that doesn’t really matter
in there that doesn’t really matter
in there that doesn’t really matter because you’re not going to be
because you’re not going to be
because you’re not going to be connecting that that’s just kind of
connecting that that’s just kind of
connecting that that’s just kind of annoying we’re gonna be getting some
annoying we’re gonna be getting some
annoying we’re gonna be getting some stronger wires just salvaging them from
stronger wires just salvaging them from
stronger wires just salvaging them from a other adapter that you could just
a other adapter that you could just
a other adapter that you could just probably find in your house you can see
probably find in your house you can see
probably find in your house you can see those two wires there it’s kind of want
those two wires there it’s kind of want
those two wires there it’s kind of want to just slide it forward and then turn
all right that is probably the most
all right that is probably the most annoying part I don’t know why they did
annoying part I don’t know why they did
annoying part I don’t know why they did it like that so now you can see how the
it like that so now you can see how the
it like that so now you can see how the battery compartment is actually already
battery compartment is actually already
battery compartment is actually already built into the glasses this is actually
built into the glasses this is actually
built into the glasses this is actually really neat and you just kind of push
really neat and you just kind of push
really neat and you just kind of push this backward and go you may want to
this backward and go you may want to
this backward and go you may want to desolder this at this point so you can
desolder this at this point so you can
desolder this at this point so you can see how the positive and negative
see how the positive and negative
see how the positive and negative terminals are labeled and even if it
terminals are labeled and even if it
terminals are labeled and even if it wasn’t you know that red is positive
wasn’t you know that red is positive
wasn’t you know that red is positive black is negative
black is negative
black is negative I’m going to go ahead and use our
I’m going to go ahead and use our
I’m going to go ahead and use our soldering iron just to attach those
soldering iron just to attach those
soldering iron just to attach those which is just good and heat that up till
which is just good and heat that up till
which is just good and heat that up till it’s sort of liquifies and on the other
it’s sort of liquifies and on the other
it’s sort of liquifies and on the other side as well and there you go now in
side as well and there you go now in
side as well and there you go now in hindsight I should have removed the
hindsight I should have removed the
hindsight I should have removed the battery before doing that now we’re
battery before doing that now we’re
battery before doing that now we’re going to make sure that we first remove
going to make sure that we first remove
going to make sure that we first remove the battery and then just do the same
the battery and then just do the same
the battery and then just do the same you’re gonna want to angle this remember
you’re gonna want to angle this remember
you’re gonna want to angle this remember make sure that you have enough downward
make sure that you have enough downward
make sure that you have enough downward pressure so that you don’t strip the
pressure so that you don’t strip the
pressure so that you don’t strip the screw okay may want to use the flat-head
screw okay may want to use the flat-head
screw okay may want to use the flat-head screwdriver just sort of pry this I mean
screwdriver just sort of pry this I mean
screwdriver just sort of pry this I mean this is by far the most annoying part of
this is by far the most annoying part of
this is by far the most annoying part of the entire build yeah I know it looks
the entire build yeah I know it looks
the entire build yeah I know it looks really ugly but it’s just how it’s got
really ugly but it’s just how it’s got
really ugly but it’s just how it’s got to be and then we’re going to just
to be and then we’re going to just
to be and then we’re going to just desolder these two wires so go ahead and
desolder these two wires so go ahead and
desolder these two wires so go ahead and just lift this up here this is pretty
just lift this up here this is pretty
just lift this up here this is pretty much just held in with friction first
much just held in with friction first
much just held in with friction first would stick this little hook in there
would stick this little hook in there
would stick this little hook in there and then press this down so in order to
and then press this down so in order to
and then press this down so in order to open this you just pull up all you’re
open this you just pull up all you’re
open this you just pull up all you’re sort of pulling this way so this side up
sort of pulling this way so this side up
sort of pulling this way so this side up while you push and then you have the
while you push and then you have the
while you push and then you have the wire compartment with a battery just
wire compartment with a battery just
wire compartment with a battery just right there and then we’re going to go
right there and then we’re going to go
right there and then we’re going to go ahead and just you slaughter this and
ahead and just you slaughter this and
ahead and just you slaughter this and like I said we’re not going to be using
like I said we’re not going to be using
like I said we’re not going to be using these little ribbon cables because they
these little ribbon cables because they
these little ribbon cables because they are work of the devil it’s just the most
are work of the devil it’s just the most
are work of the devil it’s just the most inconvenient thing and if that would
inconvenient thing and if that would
inconvenient thing and if that would even just break by making a crease like
even just break by making a crease like
even just break by making a crease like if you were to bend that and it wouldn’t
if you were to bend that and it wouldn’t
if you were to bend that and it wouldn’t work like they’re the most annoying
work like they’re the most annoying
work like they’re the most annoying thing the next part is working with
thing the next part is working with
thing the next part is working with removal of the actual display so this is
removal of the actual display so this is
removal of the actual display so this is where you probably get nervous but I
where you probably get nervous but I
where you probably get nervous but I promise you it’s not that big of a deal
promise you it’s not that big of a deal
promise you it’s not that big of a deal so there is
so there is
so there is a screw here one right on the nose plate
a screw here one right on the nose plate
a screw here one right on the nose plate here which may or may not actually be
here which may or may not actually be
here which may or may not actually be necessary to remove I don’t know because
necessary to remove I don’t know because
necessary to remove I don’t know because it’s just this little piece of like
it’s just this little piece of like
it’s just this little piece of like rubber here and then there’s another two
rubber here and then there’s another two
rubber here and then there’s another two right here okay and then now that we’ve
right here okay and then now that we’ve
right here okay and then now that we’ve already disassembled the batteries it
already disassembled the batteries it
already disassembled the batteries it really doesn’t matter you can move these
really doesn’t matter you can move these
really doesn’t matter you can move these there’s two more screws on the top and
there’s two more screws on the top and
there’s two more screws on the top and bottom of the little hinge
you’ll notice these ones are a little
you’ll notice these ones are a little bit longer than the other screws
yeah just be careful with these screws
yeah just be careful with these screws you don’t want to strip anything
you don’t want to strip anything
you don’t want to strip anything although these ones aren’t as important
although these ones aren’t as important
although these ones aren’t as important because it just holds the hinge together
because it just holds the hinge together
because it just holds the hinge together all right so let’s clear this out you
all right so let’s clear this out you
all right so let’s clear this out you can see how thin those wires are this is
can see how thin those wires are this is
can see how thin those wires are this is why it gets a little bit annoying but
why it gets a little bit annoying but
why it gets a little bit annoying but like I said these don’t matter because
like I said these don’t matter because
like I said these don’t matter because you’re going to be soldering a much
you’re going to be soldering a much
you’re going to be soldering a much stronger connection to the board and you
stronger connection to the board and you
stronger connection to the board and you don’t need to worry about any sort of
don’t need to worry about any sort of
don’t need to worry about any sort of flexion in the actual piece everything
flexion in the actual piece everything
flexion in the actual piece everything is pretty much housed in between these
is pretty much housed in between these
is pretty much housed in between these two pieces all right so that’s one piece
two pieces all right so that’s one piece
two pieces all right so that’s one piece and you can see that’s actually what is
and you can see that’s actually what is
and you can see that’s actually what is holding this thing in place and there’s
holding this thing in place and there’s
holding this thing in place and there’s a screw there and a screw there all
a screw there and a screw there all
a screw there and a screw there all right so now we have some gloves on and
right so now we have some gloves on and
right so now we have some gloves on and you go ahead and remove the display
you go ahead and remove the display
you go ahead and remove the display remember you want be very careful at
remember you want be very careful at
remember you want be very careful at this point and you can see how it’s just
this point and you can see how it’s just
this point and you can see how it’s just already lifting right off of platform
already lifting right off of platform
already lifting right off of platform and the wires just kind of comes out
and the wires just kind of comes out
and the wires just kind of comes out right there and the other one right here
again make sure that you’re very careful
again make sure that you’re very careful at this part you don’t want to slip and
at this part you don’t want to slip and
at this part you don’t want to slip and then stab the and scratch any of the
then stab the and scratch any of the
then stab the and scratch any of the LEDs so just be very gentle no big deal
LEDs so just be very gentle no big deal
LEDs so just be very gentle no big deal and there is your board we’ll just go
and there is your board we’ll just go
and there is your board we’ll just go ahead and rest it on that piece right
ahead and rest it on that piece right
ahead and rest it on that piece right there now if you want to check out and
there now if you want to check out and
there now if you want to check out and see if it still works you can go ahead
see if it still works you can go ahead
see if it still works you can go ahead and solder the electronics back on
so make sure that you remove the battery
so make sure that you remove the battery first I really don’t care about
first I really don’t care about
first I really don’t care about connecting it back to this so I’m going
connecting it back to this so I’m going
connecting it back to this so I’m going to now remove the actual connections you
to now remove the actual connections you
to now remove the actual connections you can see the positive and the negative
can see the positive and the negative
can see the positive and the negative still on there the positive is at the
still on there the positive is at the
still on there the positive is at the top and then give them the bottom and
top and then give them the bottom and
top and then give them the bottom and here it says bat + bat negative so
here it says bat + bat negative so
here it says bat + bat negative so really really simple all right
really really simple all right
really really simple all right and desolder this to desolder something
and desolder this to desolder something
and desolder this to desolder something you just need a soldering iron you do
you just need a soldering iron you do
you just need a soldering iron you do basically laid on there until it looks
basically laid on there until it looks
basically laid on there until it looks like it gets liquefied and you can tell
like it gets liquefied and you can tell
like it gets liquefied and you can tell it’ll just sink right in okay and then
it’ll just sink right in okay and then
it’ll just sink right in okay and then you just want to do it to the other side
you just want to do it to the other side
you just want to do it to the other side well it’s still sort of molten and good
well it’s still sort of molten and good
well it’s still sort of molten and good and just kind of show you now notice
and just kind of show you now notice
and just kind of show you now notice that these are both still separated you
that these are both still separated you
that these are both still separated you don’t want to accidentally have the
don’t want to accidentally have the
don’t want to accidentally have the solder transfer over onto the positive
solder transfer over onto the positive
solder transfer over onto the positive side otherwise it’s not going to work so
side otherwise it’s not going to work so
side otherwise it’s not going to work so now that we have the board removed and
now that we have the board removed and
now that we have the board removed and we still have our two battery
we still have our two battery
we still have our two battery connections we’re gonna go and resaw to
connections we’re gonna go and resaw to
connections we’re gonna go and resaw to this to the board you’re gonna have to
this to the board you’re gonna have to
this to the board you’re gonna have to decide how long you want the extensions
decide how long you want the extensions
decide how long you want the extensions to be and you may even want to create
to be and you may even want to create
to be and you may even want to create your own extensions with a little bit of
your own extensions with a little bit of
your own extensions with a little bit of a thicker wire or create a better
a thicker wire or create a better
a thicker wire or create a better soldering joint here so you just go
soldering joint here so you just go
soldering joint here so you just go ahead and heat up that slaughter and
ahead and heat up that slaughter and
ahead and heat up that slaughter and that connects right to the board and
that connects right to the board and
that connects right to the board and then with this wire same thing heat up
then with this wire same thing heat up
then with this wire same thing heat up the solder on the actual piece of wire
the solder on the actual piece of wire
the solder on the actual piece of wire and then just dab it onto the board same
and then just dab it onto the board same
and then just dab it onto the board same with this one
now this soldering board is at 400
now this soldering board is at 400 degrees so it heats up pretty quickly
alright so I guess this is the moment of
alright so I guess this is the moment of truth to see if actually still works all
truth to see if actually still works all
truth to see if actually still works all right and it does still work let’s see
right and it does still work let’s see
right and it does still work let’s see if we still have a good connection we
if we still have a good connection we
if we still have a good connection we have bluetooth and we’ll go ahead and
have bluetooth and we’ll go ahead and
have bluetooth and we’ll go ahead and yep found it link and then go into
yep found it link and then go into
yep found it link and then go into equalizer just as a test you can see
equalizer just as a test you can see
equalizer just as a test you can see that it’s still working so here is the
that it’s still working so here is the
that it’s still working so here is the thermal lens this piece of plastic now
thermal lens this piece of plastic now
thermal lens this piece of plastic now this is the layer that allows you to be
this is the layer that allows you to be
this is the layer that allows you to be protected from your lenses fogging up
protected from your lenses fogging up
protected from your lenses fogging up there’s an air layer in between he was a
there’s an air layer in between he was a
there’s an air layer in between he was a hairdryer just to very lightly heat up
hairdryer just to very lightly heat up
hairdryer just to very lightly heat up the foam layer and you can actually peel
the foam layer and you can actually peel
the foam layer and you can actually peel back the adhesive so that you can access
back the adhesive so that you can access
back the adhesive so that you can access the inner portion where you’re going to
the inner portion where you’re going to
the inner portion where you’re going to lay the actual board you can see the
lay the actual board you can see the
lay the actual board you can see the wires this is actually the old battery
wires this is actually the old battery
wires this is actually the old battery cap if you heat this up with a hairdryer
cap if you heat this up with a hairdryer
cap if you heat this up with a hairdryer it will allow you to sort of stretch it
it will allow you to sort of stretch it
it will allow you to sort of stretch it almost like saran wrap over top of this
almost like saran wrap over top of this
almost like saran wrap over top of this and then you just use an exacto knife to
and then you just use an exacto knife to
and then you just use an exacto knife to cut the excess and that looks pretty
cut the excess and that looks pretty
cut the excess and that looks pretty nice I’d say and then it fits just right
nice I’d say and then it fits just right
nice I’d say and then it fits just right back on this portion here and I used
back on this portion here and I used
back on this portion here and I used some velcro pieces just to attach that
some velcro pieces just to attach that
some velcro pieces just to attach that that’s kind of hid in there and it works
that’s kind of hid in there and it works
that’s kind of hid in there and it works out pretty nice right there and side of
out pretty nice right there and side of
out pretty nice right there and side of the mask it’s connecting and it goes
the mask it’s connecting and it goes
the mask it’s connecting and it goes back to the two terminals on the actual
back to the two terminals on the actual
back to the two terminals on the actual board I’d say that’s about eight inches
board I’d say that’s about eight inches
board I’d say that’s about eight inches of extra wire maybe you want to go nine
of extra wire maybe you want to go nine
of extra wire maybe you want to go nine just in case you need a little bit of
just in case you need a little bit of
just in case you need a little bit of excess but it’s going from the face
excess but it’s going from the face
excess but it’s going from the face portion over up you can see this will
portion over up you can see this will
portion over up you can see this will kind of lip or
kind of lip or
kind of lip or I know what you want to call it and I
I know what you want to call it and I
I know what you want to call it and I just kind of sat there so if there was
just kind of sat there so if there was
just kind of sat there so if there was any extra tension had a little bit of
any extra tension had a little bit of
any extra tension had a little bit of give on the actual wire so you don’t
give on the actual wire so you don’t
give on the actual wire so you don’t tear any of the wires out and then that
tear any of the wires out and then that
tear any of the wires out and then that goes to this portion right in the front
goes to this portion right in the front
goes to this portion right in the front same with the other side you can see it
same with the other side you can see it
same with the other side you can see it goes from those two terminals you have
goes from those two terminals you have
goes from those two terminals you have your positive and negative and then it
your positive and negative and then it
your positive and negative and then it goes through this little hole right here
goes through this little hole right here
goes through this little hole right here and then back over and around and to
and then back over and around and to
and then back over and around and to this other side with the battery
this other side with the battery
this other side with the battery connection the last thing I was a little
connection the last thing I was a little
connection the last thing I was a little bit of a challenge was trying to connect
bit of a challenge was trying to connect
bit of a challenge was trying to connect the actual on/off switch so you’re gonna
the actual on/off switch so you’re gonna
the actual on/off switch so you’re gonna have to make something like this so
have to make something like this so
have to make something like this so you’re gonna need one of these small
you’re gonna need one of these small
you’re gonna need one of these small momentary switches and then I attach the
momentary switches and then I attach the
momentary switches and then I attach the positive and negative I also added some
positive and negative I also added some
positive and negative I also added some heat-shrink and then I heated it up with
heat-shrink and then I heated it up with
heat-shrink and then I heated it up with a lighter and then I crimped it using a
a lighter and then I crimped it using a
a lighter and then I crimped it using a pair of pliers this is some 18 gauge
pair of pliers this is some 18 gauge
pair of pliers this is some 18 gauge wire this is actually been salvaged from
wire this is actually been salvaged from
wire this is actually been salvaged from an old wall adapter so I’m sure you have
an old wall adapter so I’m sure you have
an old wall adapter so I’m sure you have lots of these hanging around your house
lots of these hanging around your house
lots of these hanging around your house if you don’t use them or maybe you have
if you don’t use them or maybe you have
if you don’t use them or maybe you have them just like stored somewhere you just
them just like stored somewhere you just
them just like stored somewhere you just cut that wire this actually works just
cut that wire this actually works just
cut that wire this actually works just as well or you can buy the 18 gauge wire
as well or you can buy the 18 gauge wire
as well or you can buy the 18 gauge wire use that for the majority and also some
use that for the majority and also some
use that for the majority and also some heat shrink tubing just to make sure
heat shrink tubing just to make sure
heat shrink tubing just to make sure that is everything was uniform and you
that is everything was uniform and you
that is everything was uniform and you can never go wrong with heat shrink
can never go wrong with heat shrink
can never go wrong with heat shrink tubing you can always remove it it’s
tubing you can always remove it it’s
tubing you can always remove it it’s just whenever you don’t have it and you
just whenever you don’t have it and you
just whenever you don’t have it and you already did the solder connection it’s
already did the solder connection it’s
already did the solder connection it’s like the only other option is electrical
like the only other option is electrical
like the only other option is electrical tape and two pieces together and then
tape and two pieces together and then
tape and two pieces together and then combining it with another large piece to
combining it with another large piece to
combining it with another large piece to connect this a little bit difficult to
connect this a little bit difficult to
connect this a little bit difficult to show you in the actual mask so I’m going
show you in the actual mask so I’m going
show you in the actual mask so I’m going to show you on the one that we just took
to show you on the one that we just took
to show you on the one that we just took apart you can see that on both sides of
apart you can see that on both sides of
apart you can see that on both sides of the actual terminal that there is a
the actual terminal that there is a
the actual terminal that there is a little piece here now all that is is
little piece here now all that is is
little piece here now all that is is just a connection on both sides when you
just a connection on both sides when you
just a connection on both sides when you press down this button you get
press down this button you get
press down this button you get voltage that turns on the circuit so all
voltage that turns on the circuit so all
voltage that turns on the circuit so all you need to do is connect a wire to the
you need to do is connect a wire to the
you need to do is connect a wire to the top and bottom portion right there I
top and bottom portion right there I
top and bottom portion right there I don’t see any other way to turn it on
don’t see any other way to turn it on
don’t see any other way to turn it on while it’s inside of the actual mask the
while it’s inside of the actual mask the
while it’s inside of the actual mask the thermal lens but it’s honestly not very
thermal lens but it’s honestly not very
thermal lens but it’s honestly not very difficult and I’m try and show you where
difficult and I’m try and show you where
difficult and I’m try and show you where I’ve done it on mine so you can see that
I’ve done it on mine so you can see that
I’ve done it on mine so you can see that there is a wire attached here and here
there is a wire attached here and here
there is a wire attached here and here and then that’s going back threading
and then that’s going back threading
and then that’s going back threading through this portion and then it’s just
through this portion and then it’s just
through this portion and then it’s just going to connect to the actual button
going to connect to the actual button
going to connect to the actual button here and then you can see when you hold
here and then you can see when you hold
here and then you can see when you hold that in the display goes on and when you
that in the display goes on and when you
that in the display goes on and when you hold it again turns off so the wires are
hold it again turns off so the wires are
hold it again turns off so the wires are actually traveling through this little
actually traveling through this little
actually traveling through this little groove here there’s a little hole I
groove here there’s a little hole I
groove here there’s a little hole I don’t know if that’s easy as see let’s
don’t know if that’s easy as see let’s
don’t know if that’s easy as see let’s try and focus on that but there’s a hole
try and focus on that but there’s a hole
try and focus on that but there’s a hole right here and the rest just goes into
right here and the rest just goes into
right here and the rest just goes into this little pocket now I’ve already
this little pocket now I’ve already
this little pocket now I’ve already explained that the part that you’re
explained that the part that you’re
explained that the part that you’re probably wondering is where does the
probably wondering is where does the
probably wondering is where does the wire go so right here you can see it’s
wire go so right here you can see it’s
wire go so right here you can see it’s connected to the board it’s going back
connected to the board it’s going back
connected to the board it’s going back into the mask and then back through that
into the mask and then back through that
into the mask and then back through that hole that I just showed you it’s on both
hole that I just showed you it’s on both
hole that I just showed you it’s on both sides same thing here with the wires
sides same thing here with the wires
sides same thing here with the wires going back across kind of like
going back across kind of like
going back across kind of like sunglasses on this it’s going over the
sunglasses on this it’s going over the
sunglasses on this it’s going over the ear and right back there okay and then
ear and right back there okay and then
ear and right back there okay and then there is this wire that just goes into
there is this wire that just goes into
there is this wire that just goes into this hole and just lays right on top of
this hole and just lays right on top of
this hole and just lays right on top of there and you can just jam it into that
there and you can just jam it into that
there and you can just jam it into that little groove and to close this thing up
little groove and to close this thing up
little groove and to close this thing up you just would push these pieces back in
things pretty durable and that’s it boom
things pretty durable and that’s it boom beautiful so I was gonna go like full
beautiful so I was gonna go like full
beautiful so I was gonna go like full throttle wrench and add like all the
throttle wrench and add like all the
throttle wrench and add like all the weird
weird
weird punky spikes and have this thing but it
punky spikes and have this thing but it
punky spikes and have this thing but it just ended up looking like crap I mean
just ended up looking like crap I mean
just ended up looking like crap I mean that’s not the right size then I tried
that’s not the right size then I tried
that’s not the right size then I tried making like a stencil and adding like
making like a stencil and adding like
making like a stencil and adding like this type of thing to it it just did not
this type of thing to it it just did not
this type of thing to it it just did not work there’s not enough adhesion and
work there’s not enough adhesion and
work there’s not enough adhesion and then plus whenever you add the spikes to
then plus whenever you add the spikes to
then plus whenever you add the spikes to this sort of foam with the sticky
this sort of foam with the sticky
this sort of foam with the sticky adhesive back it pulls away and creates
adhesive back it pulls away and creates
adhesive back it pulls away and creates like a little crater there and it just
like a little crater there and it just
like a little crater there and it just would not actually stick after a decent
would not actually stick after a decent
would not actually stick after a decent amount of time so I’m like okay I’m not
amount of time so I’m like okay I’m not
amount of time so I’m like okay I’m not gonna make this tutorial for someone to
gonna make this tutorial for someone to
gonna make this tutorial for someone to try it out if it’s not going to be a
try it out if it’s not going to be a
try it out if it’s not going to be a solid project in the end so
solid project in the end so
solid project in the end so unfortunately I didn’t really get the
unfortunately I didn’t really get the
unfortunately I didn’t really get the full wrench look but that was never the
full wrench look but that was never the
full wrench look but that was never the intent to begin with I just wanted a
intent to begin with I just wanted a
intent to begin with I just wanted a cool mask and a lot of people were
cool mask and a lot of people were
cool mask and a lot of people were thinking that this was wrench and I
thinking that this was wrench and I
thinking that this was wrench and I think that this is a really good
think that this is a really good
think that this is a really good tutorial if you want to create a wrench
tutorial if you want to create a wrench
tutorial if you want to create a wrench mask I don’t think anyone’s gonna stop
mask I don’t think anyone’s gonna stop
mask I don’t think anyone’s gonna stop once they don’t find the right YouTube
once they don’t find the right YouTube
once they don’t find the right YouTube tutorial if they’re really interested in
tutorial if they’re really interested in
tutorial if they’re really interested in creating this cosplay character or
creating this cosplay character or
creating this cosplay character or adding this effect to their favorite
adding this effect to their favorite
adding this effect to their favorite mask so I think that for what it’s worth
mask so I think that for what it’s worth
mask so I think that for what it’s worth this tutorial is helpful or it should be
this tutorial is helpful or it should be
this tutorial is helpful or it should be and if you have any questions you should
and if you have any questions you should
and if you have any questions you should always just reach out ask me via
always just reach out ask me via
always just reach out ask me via Instagram or Facebook or email whatever
Instagram or Facebook or email whatever
Instagram or Facebook or email whatever it’s really not a big deal and I like
it’s really not a big deal and I like
it’s really not a big deal and I like that you are engaging and that you’re
that you are engaging and that you’re
that you are engaging and that you’re interested in what I’m teaching you so
interested in what I’m teaching you so
interested in what I’m teaching you so that’s definitely a motivator also when
that’s definitely a motivator also when
that’s definitely a motivator also when people subscribe and like that’s also a
people subscribe and like that’s also a
people subscribe and like that’s also a huge motivation to continue making
huge motivation to continue making
huge motivation to continue making videos so thank you so much for watching
videos so thank you so much for watching
videos so thank you so much for watching I hope this was helpful and
I hope this was helpful and
I hope this was helpful and you’re able to apply this to whichever
you’re able to apply this to whichever
you’re able to apply this to whichever project you like as always take it easy
”
Be First to Comment